Honeywell CT1501 Installation Manual page 4

If wallplate or subbase is mounted on a vertical
outlet box (check old installation), order
196393A Cover Plate and Adapter Ring (see appro-
priate figure under step 4). Call Honeywell
Consumer Services
(1
-800-468-1 502) for ordering
information, Monday-Friday, 7:30 a.m. to 500 p.m.
Central time.
Test to make certain that your heating and
cooling systems are working. If either one
does not work, contact your local heatingfair
conditioning dealer.
NOTE: Do not operate cooling system if outdoor
temperature is below 50' F
[loo
C].
Turn off power to the heatingfcooling System
at the main fuse panel.
F
UNPACK THERMOSTAT
0
0
T H E R M O I I A T
Remove and discard shipping wrap. Save
Remove thermostat cover by lifting up from
the bottom.
Carefully remove insert protecting switch
0
bulbs.
Loosen
two
captive mounting screws, and 0
separate wallplate or subbase from back of
thermostat base.
package of screws, instructions and receipt
. .
IFT
OVER
i2
SCREWS
12.612
2