Add Code Id Prefix To All Symbologies; Function Code Transmit - Honeywell 4600g Quick Start Manual

Add Code ID Prefix to all Symbologies

Scan the following barcode if you wish to add a
Code ID prefix to all symbologies at once.
Add Code ID Prefix To All Symbologies
Note: For a complete list of Code IDs, see the
User's Guide for your product at our website,
www.honeywell.com/aidc.

Function Code Transmit

When this selection is enabled and function codes
are contained within the scanned data, the imager
transmits the function code to the terminal. Charts
of these function codes are provided in your User's
Guide. When the imager is in keyboard wedge
mode, the scan code is converted to a key code
before it is transmitted.
(Temporary)
Enable
(Default)
Disable
8