Location Of Parts And Controls; Front Side - Honeywell Q7055A Installation Instructions & User Manual

BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN

2 Location of Parts and Controls

The numbering for the parts and controls in this
section is referring to the pictures on the rear side of
the title page. In order to have a reference between
the numbering here and the device pictures, it is
possible to fold this page out.
2.1

Front Side

Differences between the various BNA types are
explicitly noted
description.
1 Reset
Hardware reset button. Located directly behind
the small hole in the front panel. To reach this
button, a pointed object like a sharp pen or an
unfolded paper clip is necessary. Pressing this
button resets the BNA device immediately. This
operation is similar to power on the BNA
device.
2 Mode
Mode switch button. This button is needed to
change the bootloader modes. For a detailed
description about BNA operation modes, please
refer to chapter 6.2 Operating Modes on Page 25.
3 LAN
Local Area Network (LAN) activity display.
8
in the concerning element
EN1B-0198GE51 R0801