Honeywell TE601CELW User Manual page 4

L CLEAR REMOVABLE TABLE STAND
Holds unit in upright position on the flat surface.
M AC/DC 6V ADAPTOR
Activates the Color LCD.
REMOTE SENSOR
FEATURES
• Remote temperature transmission to the main unit via
433 MHz signal
• Case can be wall mounted using built-in hanger
• 100 feet transmission range without interference
• LCD display of measured temperature
• Temperature display selection in Fahrenheit or Celsius
• Transmission channel selection
1 A
C
TM
THERMO – SENSOR
5
A LED INDICATOR
Flashes once when the remote sensor transmits a reading to
the main unit.
Flashes twice indicating low battery.
B BATTERY COMPARTMENT
Holds two AA-size batteries.
C RESET
Resets all previous settings.
D CHANNEL SELECTOR
Selects the desired channel before installing batteries.
E WALL-MOUNT RECESSED HOLE
Keeps the remote sensor on the wall.
F °C/ °F SWITCH
Selects the temperature display in Fahrenheit or Celsius.
E
BEFORE YOU BEGIN
1. We recommend using alkaline batteries for the main unit
MADE IN CHINA and remote sensor.
F
2. Avoid using rechargeable batteries.
D
3. Insert batteries before first use, matching the polarity as
shown in the battery compartment.
4. Always install batteries in the remote sensor before the
B
main unit.
5. Press RESET after each battery change, using paper clip or
similar tool.
6. During an initial setup, place the main unit as close as
possible to the remote sensor.
7. After reception is established (remote temperature will
appear on the receiver's display), position the remote sensor
and main unit within the effective transmission range of
100 feet.
NOTE:
1. Avoid setting the time and date on the main unit before the
outdoor temperature is displayed.
2. The effective operating range may be influenced by the
surrounding building materials and how the receiver and
transmitter are positioned.
6