Related Manuals for Honeywell TE219ELW
Summary of Contents for Honeywell TE219ELW
-
Page 1: Table Of Contents
Honeywell Wireless In/Out Thermometer (TE219ELW) USER MANUAL TABLE OF CONTENTS INTRODUCTION PRODUCT OVERVIEW BEFORE YOU BEGIN BATTERY INSTALLATION LOW BATTERY WARNING GETTING STARTED PLACEMENT OF THE UNITS REMOTE AND INDOOR TEMPERATURE MAXIMUM AND MINIMUM READINGS LOST COMMUNICATION TRANSMISSION COLLISION WWVB RADIO CONTROLLED TIME... -
Page 2: Introduction
INTRODUCTION Thank you for selecting the Honeywell Wireless In/Out Thermometer. This device combines precise time keeping with monitoring and displaying the weather conditions from up to three remote locations. In this package you will find: • One main unit (receiver) •... - Page 3 FRONT/REAR VIEW A. WEATHER AND TIME IN EASY-TO READ DIGITS B. SNOOZE/LIGHT button • Stops the clock’s alarm temporarily • Activates a backlight for 5 seconds CHANNEL button • Recalls a different remote sensor reading – 1,2 or 3 • Activates the remote channels search D.
-
Page 4: Before You Begin
I. WALL- MOUNT RECESSED OPENING • Keeps the unit on the wall BATTERY COMPARTMENT • Accommodates 2 (two) UM-3 or AA 1.5V alkaline batteries K. REMOVABLE TABLE STAND • Holds unit in upright position on a flat surface REMOTE SENSOR FEATURES •... -
Page 5: Battery Installation
you intend measuring outdoor elements, place remote sensor outdoors • The main unit must be placed indoors. NOTE: 1. Avoid pressing any buttons on the main unit before the remote readings are displayed. 2. The effective operating range may be influenced by the surrounding building materials and how the receiver and transmitter are positioned. -
Page 6: Placement Of The Units
PLACEMENT OF THE UNITS The main unit can be placed on any flat surface indoors. can be placed indoors or outdoors, on a flat surface or mounted on the wall. REMOTE AND INDOOR TEMPERATURE The remote temperature information line is located on the top line of the main unit’s display. -
Page 7: Transmission Collision
(Refer to the MANUAL SETTINGS section). After the clock is set manually, place the main unit by the window for the better reception. The atomic clock receiver is programmed that it will continue to search for the atomic time signal daily for every hour between 1:00 am and 4:30 am. -
Page 8: Manual Settings
• Press MODE for the last time to return to the time of day with seconds, after the last parameter is set CLOCK ALARMS The Wireless In/Out Thermometer has two time alarms – Weekday alarm (W) and Single day alarm(S) - and one Ice Warning Alarm (PRE-AL). -
Page 9: Snooze
The backlight feature is enabled only after the time is set. To activate the backlight press the SNOOZE/LIGHT button once, and both – clock and weather station displays - will light up for five seconds. PRECAUTIONS This product is engineered to give you years of satisfactory service if handled carefully. -
Page 10: Troubleshooting
RF Transmission Frequency: 433 MHz Readings update interval: every 45 seconds EL backlight Low battery indicators – for each remote channel and main unit Clock Precise atomic time 4 US Time Zones 12/24 hour time format Crescendo 4 minutes alarm with 5 minutes snooze... -
Page 11: Fcc Statement
Address: 7865 SW Mohawk Tualatin, OR 97062 declare that the product Product No.: TE219ELW Product Name: Honeywell Wireless In/Out Thermometer Manufacturer: Hideki Electronics Ltd. Address: Unit 2304-06, 23/F Riley House, 88 Lei Muk Road, Kwai Chung, New Territories, Hong Kong is in conformity with Part 15 of the FCC Rules. -
Page 12: Standard Warranty Information
Hideki Electronics, Inc. reserves the right to repair or replace the product at our option. Copyright (2005) Hideki Electronics Inc. All Rights Reserved. The Honeywell Trademark is used under license from Honeywell Intellectual Properties Inc. Honeywell International Inc. makes no representations or warranties with respect to this product.