Honeywell PCR11ELW User Manual page 5

DISPLAYING TEMPERATURE AND ALARMS
*Press MODE to display the ALARM 1 time:
*Press MODE again to display the Alarm 2 time:
*Press MODE the third time to display the
Temperature:
SETTING TIME AND DATE MANUALLY
The time piece date and time can be set by pressing and holding the
MODE buttons for 3 seconds in Time/Temperature display with the
atomic time receiver disabled. To disable atomic time receiver, press
and hold [ — ] key until the atomic reception icon will appear from
the display.
Setting the Time
*Press MODE : the year digits will flash and year can
be set by pressing UP [+] or
DOWN [—] key.
*Press MODE again: the month digits will flash and
PM
MONTH DATE ALARM 1
*Press MODE again :the date digits will flash and
PM
MONTH DATE ALARM 2
*Press MODE again :the hour digits will flash and
PM
MONTH DATE
*Press MODE again :the minute digits will flash and
*Press MODE again : the temperature display between
MONTH DATE YEAR
*Press MODE one last time: the normal time
month can be set by pressing
UP [+] or DOWN [—] key.
date can be set by pressing
UP [+] or DOWN [—] key.
hour can be set by pressing
UP [+] or DOWN [—] key.
minute can be set by pressing
UP [+] or DOWN [—] key.
Celsius or Fahrenheit will flash
and measurement unit can be set
by pressing UP [+] or
DOWN [—] key.
display appears.
MONTH DATE YEAR
MONTH DATE YEAR
MONTH DATE YEAR
MONTH DATE YEAR
MONTH DATE
MONTH
DATE