Sony KV-28DS60U Service Manual page 12

Additional TV Features
Setting up Dolby ProLogic
Before listening to Dolby Surround sound, you can adapt the Dolby features to suit your own
taste. It is normal to set up the levels and modes of the speakers only when installing the TV
and the speakers or when changing the position of the speakers.
1 Press the MENU button on the remote control to display the
menu on the TV screen.
2 Move the OK button on the remote control DOWN to select the
symbol on the TV screen then move to RIGHT to confirm.
3 Move the OK button DOWN to select `Installation` then move
the OK button RIGHT to enter.
4 Move the OK button DOWN to select `Dolby ProLogic Setup`
then move RIGHT to enter.
5 Select `Level Settings` by moving the OK button UP or DOWN.
Move the OK button to RIGHT to enter.
6 Select Left (left speaker), Centre (centre speaker), Right (right
speaker) or Surround (surround speakers)by moving the OK
button DOWN then move the OK button RIGHT to confirm.
7 Adjust the level by moving the OK button RIGHT or LEFT.
8 After you have adjusted the level, press the OK button to
confirm.
9 Repeat steps 6 to 8 if you wish to adjust the sound levels of the
other speakers (from your sitting position the sound output
from all speakers should balance).
10 Move the OK button LEFT.
11 Select `Speaker mode` by moving the OK button DOWN then
move the OK button RIGHT to enter.
12 Push the OK button repeatedly DOWN to select:
Normal – all speakers are activated
3 Wide – surround speakers are not used, centre
speaker carries full frequency response
3 Normal – surround speakers are not used
Wide – wider bandwidth for centre speaker
Phantom – centre speaker is not used
Normal – all speakers are activated
Press the OK button to confirm your choice.
13 Select 'Delay Time' by moving the OK button DOWN then
move to RIGHT to confirm. Adjust the delay time of the surround
speakers by moving the OK button UP or DOWN (e.g 20 ms
for standard rooms, 30 ms for small rooms)
15 ms n 20 ms n 25 ms n 30 ms
Press the OK button to confirm your choice.
14 Select 'Auto Surround' by moving the OK button DOWN then
move to RIGHT to confirm. Move the OK button DOWN to
select:
On - When receiving a Dolby Surround encoded
programme, the TV switches automatically to Dolby
Surround sound (depending on availability of service
by broadcaster).
Off - normal
Press the OK button to confirm your choice.
15 Press the MENU button on the remote control to remove the
menu from the TV screen.
Additional TV Features
Operating Screen Mode
Using this Screen Mode feature you can change the aspect ratio of the screen or reproduce the
main picture image by image (Strobe function).
SCREEN MODE
Screen Mode [zoom ]
Screen Position [ 0 ]
SCREEN MODE
Screen Mode [zoom ]
Screen Position [ 0 ]
Strobe Strobe
Auto 16:9 [on]
Auto 16:9 [on] Correction [off]
Correction [off]
PRESET
Auto Programme
Programme Setup
Manual Programme Preset
Programme Sorting
Parental Lock
Installation
INSTALLATION
Further Prog. Preset
AV Preset
RGB setup
Dolby ProLogic Setup
Picture Rotation
Digital Subtitles
DOLBY PROLOGIC SETUP
Level Settings
. . . . . . . . .
Left
. . . . . . . . .
Centre . . . . . . . . .
Right
. . . . . . . . .
Surround
Speaker Mode [Normal]
Delay Time [20 ms ]
Auto Surround [off]
15 16
1 Press the MENU button on the remote control to display
the menu on the TV screen.
2 Move the OK button on the remote control RIGHT to
select `Screen Mode', then move to RIGHT to select the
brackets. Move the OK button repeatedly UP or DOWN
to select one of the following modes:
• smart - imitation of wide screen effect (16:9) for 4:3
broadcasts.
• wide - for 16:9 broadcasts
• zoom - imitation of wide screen effect (16:9) for
movies broadcast in cinemascopic format.
In zoom mode and 14:9 mode the top and bottom of
the picture are cut off. Using `Screen position' you
can move the screen up- or downwards in order to
see the cut-off parts (e.g. to read subtitles). Move the
OK button DOWN to select `Screen Position' then
move to RIGHT to confirm. Move the OK button UP
or DOWN to adjust the screen position (-4 to +4).
Press the OK button to confirm.
• 14 :9 - compromise between 4:3 and 16:9 format
• 4:3 - conventional 4:3 picture
3 Press the OK button to confirm the selection.
4 Strobe Mode
Move the OK button DOWN to select `Strobe'. Press the
OK button to confirm. The TV picture is now displayed
image by image, creating a slow motion effect. Move the
OK button UP or DOWN to select the speed of the
motion. Press the OK button to cancel the strobe mode.
5 Auto 16:9
Move the OK button DOWN to select `Auto 16:9' then
move RIGHT to confirm.
Move the OK button DOWN to select `On' for automatic
selection of format or `Off' for normal mode. Press OK
button to confirm.
6 Correction (only for Auto 16:9)
In case of automatic format detection there are two
possibilities for 4:3/14:9 signals: Set Correction to `on' if
you wish Smart mode to appear on the screen or set it to
`off' if you prefer 4:3/14:9 mode. Move the OK button
DOWN to select `Correction' then move RIGHT to
confirm. Move the OK button DOWN to select `On' or
`Off'. Press OK button to confirm.
7 Press the MENU button to remove the menu from the TV
screen.
SCREEN MODE
Screen Mode [zoom ]
Screen Position [ 0 ]
SCREEN MODE
Screen Mode [zoom ]
Screen Position [ 0 ]
Strobe Strobe
Auto 16:9 [on]
Auto 16:9 [on] Correction [off]
[off]
Correction
SCREEN MODE
Screen Mode [zoom ]
[ 0 ]
Screen Position
Strobe
Auto 16:9 [on]
Correction [off]
Smart
Wide
Zoom
14:9
4:3