Honeywell iPCAM-WI Camera Help Manual page 3

This guide covers the operation of Honeywell's iP Cameras for use with the Total Connect website. The various cameras
each have different features that can be controlled from the Total Connect website. When a particular camera is
selected, only the operating switches for that model camera will appear. Refer to the topics at the end of this
guide for details on the tool buttons and how to set your preferences for each camera. The table below highlights the
features of each internet camera model:
Camera
iPCAM-WI Camera
POWER
NETWORK
iPCAM-PT Camera
After logging into Total Connect, click Video.
1
From the drop-down menu, choose the video system you want to view. Click Launch Video System.
2
If your PC does not have QuickTime® and Flash® You will be prompted to install or update these
applications.
iP Cameras Online Help Guide
Features
Wired or Wireless
•
Fixed Lens
•
Video Motion Detection
•
Wired or Wireless
•
Fixed Lens
•
Video Motion Detection
•
– 1 –
Pan and Tilt with presets
•
Aux Lighting
•
Note: After approximately
30-minutes of inactivity, the
Video session will time out
and disconnect.