FUEL SEDIMENT CUP CLEANING
The sediment cup prevents dirt or water which may
be in the fuel tank
from entering the carburetor. If the engine has not been run for a long
time, the sediment cup should be cleaned.
1. Turn the engine switch to the
OFF position.
2. Turn the fuel valve lever to the OFF position.
3. Remove the sediment cup by turning
it
counterclockwise.
4.Clean the sediment cup and O-ring in nonflammable or high flash
point solvent.
5. Reinstall the O-ring, and sediment cup.
6.
Turn the fuel valve
ON
and check for
leaks.
SEDIMENT CUP
49