Honda H1000 Series Operator's Manual page 6

DEALER INSTALLATION INSTRUCTIONS
1.
MULCHING KIT CONTENTS
Mulching Blade
Swirl Guide A
Swirl Guide B
Cover Plate
Flange Bolts (2)
Flange Bolt (1)
Flange Bolts (2)
6 mm Flat
Washers (6)
8 mm Flat
Washers (4)
Lock Nuts
6 mm
Lock Nuts
8 mm
2
MULCHING KIT INSTALLATION
The mower deck must be removed from the riding
mower to install the mulching kit. Refer to deck
removal and installation instructions in the
owner's manual or shop manual.
Installation requires drilling additional bolt holes.
For your safety, wear eye protection when
operating power tools.
1. Remove the blade, blade holder, and
discharge chute (or lower chute if equipped
with the grass-bagging kit). Use a wooden
block to prevent the blade from turning when
removing the bolts.
BLADEWASHER
2. Clean and inspect the mower deck. The deck
must be free of dents and deformities for the
mulching kit to fit properly.
x mm
12 25
FLANGE BOLT(2)
mm
12 LOCK
WASHER
BLADE HOLDER B
BLADE HOLDER A
I