Honda 2001 Integra Hatchback Owner's Manual page 214

Main Menu
Table of Contents
Replacing a High-mount Brake
Light Bulb
LS model
1. Undo the cover fasteners by
pushing on the center of each
fastener's head until it pops in.
Remove the cover.
2. Determine which bulb is burned
out.
3. Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
4. Test the lights to make sure the
new bulb is working.
5. Reset each fastener by pushing on
the pointed end until it pops back
almost flush with the fingers on
the housing.
6. Reinstall the cover. Secure each
fastener by pushing on the center
until it locks (the center is flush
with the head).
Maintenance
Lights