Auto White Balance 5800K Standard Data Input 1 - Sony MVC-CD250 Service Manual

15. Auto White Balance 5800K Standard Data Input 1

RadarW RadarW RadarW RadarW RadarW
Adjust the white balance standard data at 5800K.
Mode CAMERA
Subject Clear chart
(Standard picture frame with the
zoom lens at WIDE end)
Filter Filter C14 for color temperature
correction
Adjustment Page F
Adjustment Address 88 to 93, 98 to 9B, A0 to A3, B1,
B3
Note 1: Check that the data of page: 6, address: 02 is "00".
If not, turn the power of unit OFF/ON.
Note 2: "Auto White Balance 5800K Standard Data Input 1" is
available only once after the power is turned on. Turn the
power off, then on again if the adjustment is retried.
Adjusting method:
Order Page Address Data
1
2
3
4 F A0 2A
5 F A1 A0/80 Press PAUSE button. (Note 4)
6 F A2 61/5D Press PAUSE button. (Note 4)
7 F A3 00/C0 Press PAUSE button. (Note 4)
8 6 B6
9 6 B6 03
10 6 37 07
11 6 01 11
12 6 38
13 6 01 C3
14 6 02
15 6 37 00
16 6 01 00
17 6 37 08
18 6 01 A5
19 6 02
Note 3: The adjustment data will be automatically input to page:
F, address: 88 to 93, 98 to 9B, A0 to A3, B1 and B3.
Note 4: MVC-CD250/MVC-CD400
Procedure
Place the C14 filter on the lens.
Perform "Data setting during
camera system adjustment".
(Refer to page 5-14)
Perform "Picture Frame set-
ting ". (Refer to page 5-15)
Press PAUSE button.
Note down the data.
Press PAUSE button.
Check the data changes to
"01".
Press PAUSE button. (Note 3)
Check the data changes to
"01".
Press PAUSE button.
Press PAUSE button. (Note 3)
Check the data changes to
"01".
Processing after Completing Adjustment:
Order Page Address Data
1 6 37
2 6 01
3 6 B6
4
5
5-25
MVC-CD250/CD400
Procedure
00
00 Press PAUSE button.
Set data noted down at step 8,
and press PAUSE button.
Release the data setting per-
formed at step 2. (Refer to
page 5-14)
Remove the C14 filter on the
lens.