Care And Cleaning; Hood Surfaces; Metal Grease Filter - GE Monogram ZV1050 Owner's Manual

For your Before servicing or cleaning the unit, switch
power off at the service panel and lock the service
safety
panel to prevent power from being switched on
accidentally. If the service panel cannot be locked,
Pour votre
securely fasten a prominent warning device, such
as a tag, to the service panel.
securité
Metal
A red signal light will alert you when 30 hours has
grease
passed.
filter
hand or in the dishwasher using nonabrasive soap.
Clean
filter
wash them in the dishwasher. Do not use abrasive
light
cleansers.
necessary until the red signal light stops glowing.
Do not use a steel-wool pad; it will scratch
Hood
the surface.
surfaces
To clean the stainless steel surface, use warm,
sudsy water or a stainless steel cleaner or
polish. Always wipe the surface in the direction of
the grain.
6

Care and Cleaning

Stainless Steel Hood
Avant de réparer ou de nettoyer votre appareil,
débranchez le courant au niveau du panneaude
service et verrouillez les mécanismes de
débranchement de service pour éviter tout
branchement accidentel au courant. Si vous
ne pouvez pas verrouiller les mécanismes de
débranchement de service, attachez soigneusement
un avertissement bien visible,comme une étiquette,
au panneau de service.
NOTE:
push them back and
down using the knob.
Front
are securely seated into the channels.
Follow the cleaner instructions for cleaning
the stainless steel surface. To inquire about
purchasing stainless steel appliance cleaner or
polish or to find the location of a dealer nearest
you, please call our toll-free number:
National Parts Center:
GEAppliances.com
800.626.2002