Sony NSP-1 Tutorials Manual page 7

Sony NSP-1 / BZNP-D1 Tutorials
Confirm firmware version of NSP1
- Click "System Settings"
- Check the Software Version
- If the Software Version is lower than 2.01, please
update NSP1 referring to a release note at
www.sony.com/nsp1,
Set Date and Time
1. Set Date and Time
2. Click Send
Set Display resolution and orientation
1. Set Display settings
Select resolution from VGA, WVGA, SVGA,
XGA and composite
recommended to drive a plasma display because
square pixel ratio makes it easy to produce
content.
Select Orientation from Landscape or Portrait
(WVGA / Landscape is assumed in the
following trainings.)
2. Click Send
Reboot NSP1
1. Click Reboot
2. Click Reboot
7
Time Zone does matter only when NTP is utilized to adjust date and time automatically over network. Currently NSP1
doesn't support "Daylight Saving Time". Followings are for normal time. -5 (EST). -6 (CST), -8 (PST).
8
There is no simultaneous video output on "Composite video signal" and "Analog RGB - VGA (HD15) signal"
7
8
. WVGA (848x480) is
- 7 -