Table of Contents
Advertisement
ASSEMBLY INFORMATION
GENERAL
Read assembly instructions completely prior to installing loader to familiarize yourself with all
mounting and hydraulic system installation procedures.
The loader operates from its self contained hydraulic system with the pump driven from the
tractor front PTO.
A pipe thread sealant must be used on all pipe threads.
All hardware required for mounting loader is supplied.
Loader mount component hardware should be left loose until all mount components have been
installed.
Unless otherwise specified, refer to torque specification table for torque values of hardware
required for assembly.
Lay out and identify all components prior to installation.
AMERICAN
Bolt Head Markings
SAE Grade 2
(No Dashes)
SAE Grade 5
(3 Dashes)
METRIC
Numbers appearing on bolt heads
indicate ASTM class.
12
ASSEMBLY INFORMATION
TORQUE SPECIFICATIONS
Proper torque for American fasteners used on Honda equipment
Recommended Torque in Foot Pounds (Newton Meters).
Use 75% of the specified torque'value for plated
fasteners. Use 85% of the specified torque values
for lubricated fasteners;
Proper torque for metric fasteners used on Honda equipment.
Recommended Torque in Foot Pounds (Newton Meters).
ASTM
BOLT
ASTM
CLASS
DIA.
CLASS
(mm) "B"
8.8
4.6
5
1.8 (2.4)
6
3 (4)
8
7.3 (10)
10
14.5 (20)
12
25 (34)
74 (100)
I
ASTY
ASTY
CLASS
CLASS
10.9
9.8
6.5 (8.8)
5.1 (6.9)
8.7 (12)
11.1 (15)
21.1 (29)
27 (37)
53 (72)
42 (57)
73 (99)
93 (126)
Advertisement
Table of Contents
