Honda 00X31-TK6-6100 Owner's Manual page 277

5. Place the top of the wiper blade on
the end of the blade assembly, and
slide the blade onto the assembly.
Make sure the blade is completely
installed.
6. Slide the wiper blade assembly
onto the wiper arm. Push down the
lock tab. Make sure the wiper
blade assembly locks in place.
7. Lower the wiper arm down against
the windshield, the passenger's
side first, then the driver's side.
Wiper Blades
To replace the rear wiper blade:
1. Raise the wiper arm off the rear
window.
2. Disconnect the blade assembly
from the wiper arm by pivoting the
blade assembly upward.
CONTINUED
271