Carry Cases; Holster Carry Cases - Cisco 7925G Accessory Manual

Carry Cases

Procedure
Step 1 Put the cable (with loops at each end) around a post or cable that is used to lock your computer, and then put
the two loops at the ends of the cable in the C-ring.
Step 2
Insert the C-ring in the slot on the back of the phone.
Step 3 Using the combination lock, fasten the two ends of the C-ring together to secure the phone.
Carry Cases
Carry cases make it easy to keep the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G with
you and provide some protection for the phone. The following sections describe the available carry cases.

Holster Carry Cases

The holster carry case is a hard plastic case that holds the phone and has a clip on the back that rotates 180
degrees. Use the clip to secure the phone to a belt or pocket.
There are two holster cases available: Cisco Unified Wireless IP Phone 7925G Holster Case and Cisco Unified
Wireless IP Phone 7926G Holster Case.
The following figure shows the Cisco Unified Wireless IP Phone 7925G Holster Case. The Cisco Unified
Wireless IP Phone 7926G Holster Case is similar in appearance, but is shaped differently to accommodate
the bar code scanner of the Cisco Unified Wireless IP Phone 7926G.
Figure 4: Cisco Unified Wireless IP Phone 7925G Holster Carry Case
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Accessory Guide
6
Cisco Accessories