Table of Contents
Advertisement
HS50M
I
HS50M DISASSEMBLY PROCEDURE
1.
Woofer
(Time required: about 1 minute)
1-1
Remove the four (4) screws marked [55]. The woofer
ring can then be removed. (Fig. 1)
1-2
Remove the four (4) screws marked [40]. The woofer
can then be removed. (Fig. 1)
2.
Tweeter
(Time required: about 1 minute)
Remove the four (4) screws marked [20]. The tweeter
can then be removed. (Fig. 1)
3.
Rear Panel Assembly
1 minute)
Remove the ten (10) screws marked [155]. The rear
panel assembly can then be removed. (Fig. 2)
4.
AMP Circuit Board
(Time required: about 2 minutes)
4-1
Remove the rear panel assembly. (See procedure 3.)
4-2
Remove the three (3) screws marked [90]. The AMP
unit can then be removed. (Fig. 2)
*
At this time, be careful not to lose the plate which
also comes off.
[20]
[40]
[55]
Fig. 1
[20]:
Hexagonal Socket Tapping Screw 4x20 (WG341100)
[40]:
Bind Head Tapping Screw 4x16 (WG540200)
[55]:
Hexagonal Socket Tapping Screw 4x20 (WG341100)
(Time required: about
Tweeter
[20]
Woofer
[55]
Woofer Ring
[40]
[90]
[155]
Fig. 2
[90]:
Bind Head Tapping Screw-S 3x10 (WG341400)
[155]: Bind Head Tapping Screw 4x16 (WG540200)
HS80M/HS50M
Rear Panel Assembly
[155]
11
Hide quick links:
Advertisement
Table of Contents
