Binary Image Display - Sharp IV-S30 User Manual

Setting the Operating and System Conditions

[5] Binary image display

Select "YES" or "NO" to display a binary image on the MAIN OPS MENU.
Note: When "CAM1&2(HORIZ VERT)" or "CAM1&NG-IMG(HORIZ VERT)" is selected on the
"MONITOR OUTPUT" (page 2-3), the binary image display cannot be selected.
2
On the MAIN OPS MENU, move the cursor to "OPS-CND," and press the SET key.
Ë Ë Ë Ë Ë Operation procedure
1. On the [TYPE RUN COND] menu, move the cursor to item "SHOW BINARY IMG" with the up and
down keys, and press the SET key.
2. Move the cursor to "YES" or "NO" with the left and right keys, and press the SET key.
Ë Ë Ë Ë Ë Display example
(TYPE00)
OK
MEAS XXXXms XXXX-XX-XX XX:XX
MEASUREMENT1 CNT-BIN-OBJ
K0=00006
A0=015781
K1=00020
A1=087620
K2=00010
A2=042680
K3=
A3=
X0~7
CHG-MEA CHG-REG CHG-RST CHG-C1 CHG-C2 CHG-EVAL CUSTOM-MNU
OPS-CND MEA-CND SYS-CND CHG-TYPE NG-IMG-DSP NEXT-NG MANL-MEAS
[TYPE RUN COND]
4PATTERN DISPLAY YES NO
5SHOW BINARY IMG YES NO
6SHOW
FIX IMG
1
2
5SHOW BINARY
IMG
A binary image will be displayed on the MAIN OPS MENU.
YES
A binary image will not be displayed on the MAIN OPS MENU.
NO
OK
OK
OK
OK
OK
OK
Y0~7 READY
YES NO
Description
F.IMG C1 L (TYPE00)
OK
VX.X
MEAS XXXXms XXXX-XX-XX XX:XX
MEASUREMENT1 CNT-BIN-OBJ
K0=00006 OK
A0=015781 OK
K1=00020 OK
A1=087620 OK
K2=00010 OK
A2=042680 OK
K3=
A3=
X0~7 Y0~7
CHG-MEA CHG-REG CHG-RST CHG-C1 CHG-C2 CHG-EVAL CUSTOM-MNU
OPS-CND MEA-CND SYS-CND CHG-TYPE NG-IMG-DSP NEXT-NG MANL-MEAS
2-8
F.IMG C1 L
VX.X
READY