Settings; Application Settings; Device And Sim Card Security; Common Accessory Settings - Nokia 6730 classic User Manual

Hide thumbs Also See for 6730 classic:
Table of Contents

Advertisement

Settings

Application settings

Select
> Settings > Settings and Applications.
Select an application from the list to adjust its settings.

Device and SIM card security

Select
> Settings > Settings > General >
Security.
To change the PIN code, select Phone and SIM card >
PIN code. The new code must be 4 to 8 digits long. The
PIN code protects your SIM card against unauthorised
use and is provided with the SIM card. After three
consecutive incorrect PIN code entries, the code is
blocked, and you need to use the PUK code to unblock
it before you can use the SIM card again.
To set the keypad to lock automatically after a defined
period, select Phone and SIM card > Keypad
autolock period.
To set a time-out period after which the device is
automatically locked and can be used only if the correct
lock code is entered, select Phone and SIM card >
Phone autolock period. Enter the length of the time-
out period in minutes, or select None to deactiveate
the autolock feature. When the device is locked, you
can still answer incoming calls, and calls may still be
possible to the official emergency number
programmed into your device.
To change the lock code, select Phone and SIM card >
Lock code. The default lock code is 12345. Enter the
56
current code and then the new code twice. The new
code must be 4-255 characters long. Alphanumeric
(uppercase and lowercase) characters can be used. The
device notifies you if the lock code is not properly
formatted.

Common accessory settings

Select
Enhancement.
With most accessories, you can do the following:
To define which profile is activated when you attach an
accessory to your device, select the accessory and
Default profile.
To set the device to answer phone calls automatically
after 5 seconds when an accessory is attached, select
Automatic answer > On. If the ringing type is set to
Beep once or Silent in the selected profile, automatic
answering is disabled.
To illuminate the device while it is attached to an
accessory, select Lights > On.

Restore original settings

To restore the original device settings, select
Settings > Settings and General > Factory
settings. To do this, you need your device lock code.
After resetting, the device may take a longer time to
switch on.
© 2009 Nokia. All rights reserved.
> Settings > Settings and General >
>

Advertisement

Table of Contents
loading

Table of Contents