Advertisement
After use
Storing the flexible light arm and turning off
the light
Holding slot
Straighten the flexible light arm up as illustrated and rotate the light
unit to its original position, then lower it into the holding slot. The light is
turned off automatically.
Notes
• Be sure the flexible light arm is stored in the holding slot properly.
• If the light does not turn off automatically, check the light window is facing
the device and the light unit stored in its original position ().
To remove the Reader
Pull the tabs, and remove the Reader.
Specifications
Brightness control
2 levels (Standard and High)
Battery life
Maximum 19 hours * (at Standard brightness) with a
AAA (LR03) battery
* The time above may differ depending on ambient temperature or
the status of use.
Operating temperature
41°F to 95°F (5°C to 35°C)
Dimensions
Approx. 6
/
x 8
/
x
1
1
8
8
(Approx. 155 x 204 x 19 mm)
Weight (battery included)
Approx. 6.5 oz (185 g)
Supplied items
AAA (LR03) battery × 1
User Guide × 1
Design and specifications are subject to change without notice.
/
inches (w/h/d)
3
4
Notes on use
• Do not place the unit in locations that are:
– Extremely hot or cold
– Dusty or dirty
– Very humid
– Vibrating
– Strong magnetic fields
– Sandy
– Exposed to direct sunlight
• Do not apply mechanical shock or drop the unit.
• Be sure that nothing metallic comes into contact with the metal parts of
this unit. If this happens, a short circuit may occur and the unit may be
damaged.
• Always keep the metal contacts clean.
• Do not disassemble or convert the unit.
• While the unit is in use, it gets warm. This is normal.
• Keep the unit away from TV or AM receivers, as it may disturb reception.
• To prevent possibly damaging the Reader, make sure that there is no dirt
or dust inside the cover or the Reader before use. If necessary, wipe the
cover or the Reader with a soft cloth, such as a cleaning cloth for
eyeglasses.
• Do not put any cards such as cash cards or credit cards with magnetic
coding near the magnet stored in the brightness control switch, light unit
or holding slot. Otherwise, your cards may become impaired due to the
magnetic effect.
• Do not directly look at the light.
On cleaning
Clean the unit with a soft dry cloth, or a soft cloth lightly moistened with a
mild detergent solution. Do not use any type of solvent, such as alcohol or
benzine, which may damage the finish.
If you have any questions about this product:
Support Website:
http://www.sony.com/readersupport
Advertisement
