Light Engine Adjustment; Test Signal Activation - Mitsubishi WD-52527 Service Manual

Light Engine Adjustments

Test Signal Activation

1) Press "MENU-2-4-5-7" (Service Mode)
2) Press "REW" (Test Pattern).
Red = 4% overscan
White = 5% overscan
Green = 6% overscan
Cyan = 7% overscan
Yellow = 10% overscan
Prelminary (refer to the diagram below)
1) Remove Back Board
2) Loosen Fixing Screws (1) and (2) in the Slide Lock Mate
3) Loosen Nuts (1) and (2) on the Adjuster
4) Loosen [A-1] and [A-2] on the Adjuster
MODEL: WD-52527 / WD-52528 / WD-62527 / WD-62528
Light Engine (Rear View)
Page 30