Monitor Specifications; Flat-Panel Specifications; Resolution Specifications; Video Supported Modes - Dell P2314H User Manual

6 USB downstream Connect your USB device. You can only use
port this connector after you have connected the
USB cable to the computer and USB upstream
connector on the monitor.
7 Stand lock To disable the stand release button and lock
the stand assembly using an M3 X 6 mm screw
(screw not included).

Monitor Specifications

Flat Panel Specifications
Screen type Active matrix - TFT LCD
Panel type In plane switching
Viewable image dimensions
Diagonal 58.42 cm (23 inches)
Horizontal Active Area 509.18 mm (20.05 inches)
Vertical Active Area 286.42 mm (11.28 inches)
Area 145839.34 mm
Pixel pitch 0.2652 (H) mm x 0.2652 (V) mm
Viewing angle 178° (vertical) typical, 178° (horizontal) typical
Luminance output 250 cd/m² (typical)
Contrast ratio 1000:1 (typical)
Dynamic contrast ratio 2,000,000:1
Faceplate coating AG type,Haze 25%, hard-coating 3H
Backlight LED edgelight system
Response Time 8ms Typ. g-to-g with OD
Color depth 16.7 million colors
Color gamut (Typical) 83%* (CIE1976)
*[P2314H] color gamut (typical) is based on CIE1976 (83%) and CIE1931 (72%)
test standards.

Resolution Specifications

Horizontal scan range
Vertical scan range
Maximum resolution
12 About Your Monitor

2 (226.05 inch 2 )
30 kHz to 83 kHz (automatic)
56 Hz to 76 Hz (automatic)
1920 x 1080 at 60 Hz

Video Supported Modes

Video display capabilities 480p, 576p, 720p, 1080p and 1080i
(DVI playback)

Preset Display Modes

Display Mode Horizontal Vertical
Frequency Frequency
(kHz) (Hz)
720 x 400 31.5 70.0
640 x 480 31.5 60.0
640 x 480 37.5 75.0
800 x 600 37.9 60.0
800 x 600 46.9 75.0
1024 x 768 48.4 60.0
1024 x 768 60.0 75.0
1152 x 864 67.5 75.0
1280 x 1024 64.0 60.0
1280 x 1024 80.0 75.0
1600 x 900 60.0 60.0
1920 x 1080 67.5 60.0

Electrical Specifications

Video input signals • Analog RGB, 0.7 Volts +/-5%, positive
polarity at 75 ohm input impedance
Digital DVI-D TMDS, 600 mV for each
differential line, positive polarity at 50 ohm
input impedance
• DP 1.2 signal input support
Synchronization input Separate horizontal and vertical
signals synchronizations, polarity-free TTL level, SOG
(Composite SYNC on green)
AC input voltage/ 100 VAC to 240 VAC/
frequency/current 50 Hz or 60 Hz + 3 Hz/1.5 A (Max.)
Inrush current 120 V:30 A (Max.)
240 V:60 A (Max.)
Pixel Clock Sync Polarity
(MHz) (Horizontal/
Vertical)
28.3 -/+
25.2 -/-
31.5 -/­
40.0 +/+
49.5 +/+
65.0 -/­
78.8 +/+
108.0 +/+
108.0 +/+
135.0 +/+
108.0 +/­
148.5 +/+
About Your Monitor 13
