Selecting A Supported Display Mode - Lenovo LI1921 User Manual

Table 2-2. OSD functions
OSD Icon on Main
Menu
Options
Exit

Selecting a supported display mode

The display mode the monitor uses is controlled by the computer. Therefore, refer to
your computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.
This is normal and the image can be readjusted using automatic image setup and the
image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or
Flat Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need to
reattach the CRT monitor temporarily until you have re-configured the system;
preferably to 1366 x 768 at 60 Hz, which is the Native Resolution Display mode.
The display modes shown below have been optimized at the factory.
Submenu
Shows resolution, refresh rate, and product details.
Note: This screen does not allow any changes to the settings.
Information
Changes languages of menu.
Note: The language chosen only affects the language of the OSD. It has
Menu Language
no effect on any software running on the computer.
Adjusts menu location.
Default
Menu Position
Default returns the menu position to the default settings.
Custom
• Horizontal: Changes the horizontal position of the OSD.
• Vertical: Changes the vertical position of the OSD.
Save
•
Save the custom position choices.
• Cancel
• Reset
Factory default
Reset monitor to the original settings.
Changes button repeat rate and menu time-out setting.
Accessibility
Select
• Off
• Default
• Slow
after the last time a button is pressed.
Exit from menu.
Description
Button repeat rate:
or to change.
Menu time out: Sets the length of time the OSD will remain active
Controls and Adjustments (Analog)
Chapter 2.
2-6