Engine Stop Switch; Engine Shut-Off Switch; Choke Knob - Yamaha WaveRunner XLT1200 2001 Owner's/Operator's Manual

EJU00705

Engine stop switch

Push this switch 1 (red button) to stop
the engine normally.
EJU00706

Engine shut-off switch

Insert the clip 1, on the end of the engine
shut-off cord 2, under the engine shut-off
switch 3 (black button). The engine will stop
automatically when the clip is removed from
the switch, such as if the operator falls off
the watercraft.
WARNING
● Always attach the engine shut-off cord
to your wrist and the clip to the engine
shut-off switch BEFORE starting the
engine.
● To prevent accidental starting of the
engine or unauthorized use by chil-
dren or others, always remove the clip
from the shut-off switch when the
engine is not running.
EJU00350

Choke knob

Starting a cold engine requires a richer
air-fuel mixture, which is supplied by the
choke.
Pull the knob 1 out to turn the choke on.
Push the knob in to turn the choke off.
2-10
E