Replacing The Chassis Intrusion Switch; Resetting The Chassis Intrusion Detector - Dell OptiPlex GX260 Service Manual
Small form-factor, small desktop, and small mini-tower computers
Hide thumbs
Also See for OptiPlex GX260:
- System user's manual (236 pages) ,
- User manual (31 pages) ,
- Disassembly (27 pages)
Table of Contents
Advertisement
2. Slide the chassis intrusion switch out of its slot and remove the switch and its attached cable from the chassis.
Replacing the Chassis Intrusion Switch
To replace the chassis intrusion switch, follow the
Resetting the Chassis Intrusion Detector
1. Enter system setup by pressing <F2> during the computer's POST.
NOTE:
For instructions on using system setup, see the User's Guide.
2. Under the System Security tab, reset the Chassis Intrusion option by pressing the left- or right-arrow key to select
Reset. Change the setting to Enabled, Enabled-Silent, or Disabled.
NOTE:
The default is Enabled-Silent.
NOTE:
If a setup password has been assigned by someone else, contact the network administrator for information on
resetting the chassis intrusion detector.
3. Press <Alt><B> to restart the computer and implement your changes.
Back to Contents Page
"Removing the Chassis Intrusion
Switch" procedures in reverse order.
Hide quick links:
Advertisement
Table of Contents
