Table of Contents
Advertisement
Quick Links
Projector
8755H/8916
User's Manual (concise)
Thank you for purchasing this projector.
WARNING ►Before using this product, be sure to read all manuals for this
product. See "Using the CD manual" (15) to read the manuals in the CD.
After reading them, store them in a safe place for future reference.
Contents
Contents of package...........................
Preparations ....................................... 2
Fastening the lens cover .................................
Arrangement ....................................... 3
Connecting your devices .................... 4
Connecting power supply ................... 5
Turning on the power .......................... 5
Adjusting the projector's elevator ....... 6
Contents of package
Your projector should come with the items
shown below. Check that all the items are
included. Contact to your dealer immediately
if any items are missing.
(1) Remote control with two AA batteries
(2) Power cord
(3) RGB cable
(4) Audio/Video cable
(5) Lens cover and Strap
Lens cover is attached to the projector.
(6) User's manuals (Book x1, CD x1)
(7) Soft case
(8) Security label
NOTE • Keep the original packing materials for future reshipment. Be sure
to use the original packing materials when moving the projector. Use special
caution for the lens.
Displaying the picture ......................... 7
Turning off the power .......................... 8
2
Replacing the lamp ............................. 9
2
Regulatory notices ............................ 3
Specifications ................................... 5
Warranty and after-service ............... 6
()
COMPUTER
VIDEO
ASPECT
AUTO
MAGNIFY
FREEZE
ON
OFF
KEYSTONE
MY BUTTON
POSITION
ESC
(2)
(3)
(4)
(5)
MY SOURCE/
DOC.CAMERA
SEARCH
BLANK
PAGE
VOLUME
UP
DOWN
MUTE
1
2
MENU
ENTER
(6)
RESET
(7)
(8)
Advertisement
Table of Contents
Related Manuals for Hitachi 8755H
Summary of Contents for Hitachi 8755H
-
Page 1: Table Of Contents
(7) Soft case (8) Security label NOTE • Keep the original packing materials for future reshipment. Be sure to use the original packing materials when moving the projector. Use special caution for the lens. Displaying the picture ... 7 Turning off the power ... -
Page 2: Preparations
Fix the strap to the strap hole of the projector. Thread the other end of the strap through the strap hole of the projector and make the loop there. Let the lens cover with the one end of strap through the loop. -
Page 3: Arrangement
352 0.8 423 4 62 WARNING ►Install the projector in a stable horizontal position. ►Place the projector in a cool place, and ensure that there is sufficient ventilation. ►Do not place the projector anyplace where it may get wet. CAUTION ►Avoid placing the projector in smoky, humid or dusty place. -
Page 4: Connecting Your Devices
Connecting your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them. -
Page 5: Connecting Power Supply
WARNING ►A strong light is emitted when the projector’s power is on. Do not look into the lens of the projector or look inside of the projector through any of the projector’s openings. NOTE • Please power on the projector prior to the connected devices. -
Page 6: Adjusting The Projector's Elevator
Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of the projector within 10 degrees. -
Page 7: Displaying The Picture
Use the VOLUME +/VOLUME - buttons to adjust the volume. To have the projector silent, press the MUTE button on the remote control. Press the INPUT button on the projector. Each time you press the button, the projector switches its input port in turn. -
Page 8: Turning Off The Power
NOTE • Please power off the projector after any connected devices are powered off. • This projector has the AUTO OFF function that can make the projector turn off automatically. For more information, please see the “Operating Guide” in the CD. -
Page 9: Replacing The Lamp
(5) Press the ▲ button to select RESET on the dialog. It performs resetting the lamp time. CAUTION ►Do not touch any inner space of the projector, while the lamp is taken out. NOTE • Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp. - Page 10 Note that shards of glass could damage the projector’s internals, or cause injury during handling, so please do not try to clean the projector or replace the lamp yourself. Disconnect • If the lamp should break (it will make a loud bang when it does),...
-
Page 11: Cleaning And Replacing The Air Filter
►Use only the air filter of the specified type. Do not use the projector without the air filter or the filter cover. It could result in a fire or malfunction to the projector. ►Clean the air filter periodically. If the air filter becomes clogged by dust or the like, internal temperatures rise and could cause a fire, a burn or malfunction to the projector. -
Page 12: Using The Cd Manual
(2) When “main.html” file is clicked, Web browser will start and Initial window will appear. 2. Click the model name of your projector first, and then click language you want from the displayed list. The User’s manual (detailed) will open. -
Page 13: Regulatory Notices
CP-X201/CP-X301/CP-X401/CP-X450 Responsible Party Hitachi America, Ltd. Address 900 Hitachi way, Chula Vista, CA 91914-3556 U.S.A. Telephone Number +1 -800-225-1741 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. - Page 14 Regulatory notices (continued) Information for users applicable in European Union countries 1. The manufacturer (Gemtek) hereby declare that this equipment (wireless network card), model SD-Link11g is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. 2. This symbol on the product or on its packaging means that your electrical and electronic equipment should be disposed at the end of life separately from your household wastes.
-
Page 15: Specifications
Audio input/output port AUDIO IN1 ... Stereo mini x1 AUDIO IN2 ... Stereo mini x1 AUDIO IN3 ... RCA x2 AUDIO OUT ... Stereo mini x1 Others USB ...USB-B x1 CONTROL ... D-sub 9 pin x1 : 456-8755H [unit : mm] (approximately) -
Page 16: Warranty And After-Service
If an abnormal operation (such as smoke, strange odor or excessive sound) should occur, stop using the projector immediately. Otherwise if a problem occurs with the projector, first refer to the “Troubleshooting” of the “Operating Guide” in the CD and run through the suggested checks.