How To Upload A Custom Logo - ZyXEL Communications ZyWALL USG 300 User Manual

Chapter 26 SSL VPN
Table 139 VPN > SSL VPN > Global Setting (continued)
LABEL
SSL VPN Login
Domain Name
1/2
Message
Login Message
Logout Message Specify a message to display on the screen when a user logs out and
Update Client
Virtual Desktop
Logo
Browse
Upload
Reset Logo to
Default
Apply
Reset

26.3.1 How to Upload a Custom Logo

Follow the steps below to upload a custom logo to display on the remote user SSL
VPN screens.
Click VPN > SSL VPN and click the Global Setting tab to display the
1
configuration screen.
522
DESCRIPTION
Specify a domain name for users to use for SSL VPN login. The domain
name must be registered to one of the ZyWALL's IP addresses or be one
of the ZyWALL's DDNS entries. You can specify up to two domain names
so you could use one domain name for each of two WAN ports. Do not
include the host. For example, www.zyxel.com is a fully qualified
domain name where "www" is the host; so you would just use
"zyxel.com".
The ZyWALL displays the normal login screen without the button for
logging into the Web Configurator.
Specify a message to display on the screen when a user logs in and an
SSL VPN connection is established successfully. You can enter up to 60
characters ("a-z", A-Z", "0-9") with spaces allowed.
the SSL VPN connection is terminated successfully. You can enter up to
60 characters ("a-z", A-Z", "0-9") with spaces allowed.
You can upload a graphic logo to be displayed on the web browser on
the remote user computer. The ZyXEL company logo is the default logo.
Specify the location and file name of the logo graphic or click Browse to
locate it.
Note: The logo graphic must be GIF, JPG, or PNG format. The
graphic should use a resolution of 127 x 57 pixels to avoid
distortion when displayed. The ZyWALL automatically resizes
a graphic of a different resolution to 127 x 57 pixels. The file
size must be 100 kilobytes or less. Transparent background
is recommended.
Click Browse to locate the graphic file on your computer.
Click Upload to transfer the specified graphic file from your computer to
the ZyWALL.
Click Reset Logo to Default to display the ZyXEL company logo on the
remote user's web browser.
Click Apply to save the changes and/or start the logo file upload
process.
Click Reset to return the screen to its last-saved settings.
ZyWALL USG 300 User's Guide