First Time Use; The Remote Control - Hitachi 50VS810 Operating Manual

Check to make sure you have the following accessories before disposing of the packing material.
1. Remote Control Unit CLU-3842WL (Part No. HL02062) or CLU-3844WL (Part No. HL02064).
2. Two "AA" size, 1.5V batteries (For Remote Control Unit).
REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT
1. Open the battery cover of the remote control by pushing the notched part of the cover with your fingers and pulling the
cover off.
2. Insert two new "AA" size batteries for the remote control. When replacing old batteries, push them towards the springs
and lift them out.
3. Match the batteries to the (+) and (-) marks in the battery compartment.
4. Replace the cover.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace with the same or equivalent type.
REMOTE CONTROL
GUIDE
C.C.
1.
4
BATTERIES
("AA")
2.
BOTTOM VIEW
(Remote Control)
Lift up on tab to
remove back cover.
ACCESSORIES