Figure 6-16: Network Settings For New Profile; Figure 6-17: Wireless Mode For New Profile - Linksys WPC55AG User Manual

Dual-Band Wireless A+G Notebook Adapter
4. The Network Settings screen will appear. If your network has a router or other DHCP server, click the radio
button next to Obtain network settings automatically (DHCP). Click the Next button to continue, or click
the Cancel button to return to the Profiles screen.
If your network does not have a DHCP server, click the radio button next to Specify network settings. Enter
an IP Address, Subnet Mask, Default Gateway, and DNS addresses appropriate for your network. You must
specify the IP Address and Subnet Mask on this screen. If you are unsure about the Default Gateway and DNS
addresses, leave these fields empty. Click the Next button to continue, or click the Cancel button to return to
the Profiles screen.
IP Address - This IP Address must be unique to your network.
Subnet Mask - The Adapter's Subnet Mask must be the same as your wired network's Subnet Mask.
Default Gateway - Enter the IP address of your network's Gateway here.
DNS 1 and DNS 2 - Enter the DNS address of your wired Ethernet network here.
5. The Wireless Mode screen shows a choice of two wireless modes. Click the Infrastructure Mode radio
button if you want your wireless computers to communicate with computers on your wired network via a
wireless access point. Click the Ad-Hoc Mode radio button if you want multiple wireless computers to
communicate directly with each other. Enter the SSID for your network.
Click the Next button to continue or the Back button to return to the previous screen.
Infrastructure Mode - This mode allows wireless and wired networks to communicate through an access
point.
Ad-Hoc Mode - This mode allows wireless-equipped computers to communicate directly with each other. No
access point is used.
SSID - This is the network name that must be used for all the devices in your wireless network. It is case-
sensitive and should be a unique name to help prevent others from entering your network.
Chapter 6: Using the Wireless Network Monitor
Creating a New Profile

Figure 6-16: Network Settings for New Profile

Figure 6-17: Wireless Mode for New Profile

25