Linksys WPC54G Quick Installation

®
A Division of Cisco Systems, Inc.
Package Contents
• One Wireless-G Notebook Adapter
• One Setup Wizard CD-ROM with
User Guide
• One Quick Installation guide
2 4 ,
GHz
Wireless-G
802.11g
Notebook Adapter
Wireless Quick Installation
Model No.
Model No. WPC54G(EU/UK)
Software Installation and Configuration
1
for Windows 98SE, Me, and 2000
ATTENTION WINDOWS XP USERS:
Go directly to Step 2.
A
Insert the Setup Wizard CD-
ROM into your CD-ROM drive.
The Setup Wizard should run
automatically, and the Wel-
come screen should appear. If
it does not, click Start and
choose Run. In the field that
appears, enter D:\setup.exe (if
"D" is the letter of your CD-ROM
drive).
B
B
Click the Install button.
C
After reading the License
Agreement, click Next if you
agree, or Cancel to end the
installation.
D
The Setup Wizard will ask you to
C
choose a wireless mode. Click
the Infrastructure Mode radio
button if you want your wireless
computers to network with
computers on your wired net-
work using a wireless access
point. Click the Ad-Hoc Mode
radio button if you want multi-
ple wireless computers to net-
work directly with each other.
In the SSID field, enter the SSID
of your wireless network. The
SSID must be identical for all
devices in the network. The
default setting is linksys (all low-
ercase). Click Next.
For added security, Linksys rec-
ommends that you change
D
the default SSID to a unique
name.
E
If you chose Infrastructure
Mode, go to Step F now. If you
chose Ad-Hoc Mode, select a
Channel from the list provided.
All computers on your wireless
network must use the same
channel in order to communi-
cate with each other. If you are
unsure about which channel to
use, select the default channel
(Channel 6). Then, select the
Network Mode: Mixed Mode,
E
which is for both Wireless-G
and Wireless-B, or G-Only
Mode, if there will be no Wire-
less-B users. Click Next and go
to Step F.
F
The Setup Wizard will ask you to
review your settings before it
starts to copy files. Click Next if
you are satisfied with your set-
tings, or click Back to change
any settings.
F
G
After the files have been suc-
cessfully copied, you will see
Figure G. Click the Exit button.
G
Proceed to Step 2.