Accessories; Standard Accessories; Optional Accessories - Hitachi DH 45MR Safety Instructions And Instruction Manual

WARNING:
NOTE:
Accessories are subject to change without any obligation on the part of the HITACHI.

STANDARD ACCESSORIES

(1) Case (Code No. 324820) ...................................................................................................... 1
(2) Side Handle (Code No. 313078) .......................................................................................... 1
(3) Stopper (Code No. 971786) ................................................................................................. 1
(4) Allen Wrench 4 mm (Code No. 944458) ............................................................................ 1
(5) Allen Wrench 5 mm (Code No. 944459) ............................................................................ 1
(6) Hammer Grease A (Code No. 981840) ............................................................................... 1

OPTIONAL ACCESSORIES.....

For accessories in detail please call HITACHI AT 1-800-59-TOOLS
1. Through-hole drilling (Rotation + Hammering)
(1) Drill bit (SDS-max shank)

ACCESSORIES

ALWAYS use Only authorized HITACHI replacement parts and
accessories. NEVER use replacement parts or accessories which are
not intended for use with this tool. Contact HITACHI if you are not sure
whether it is safe to use a particular replacement part or accessory
with your tool.
The use of any other attachment or accessory can be dangerous and
could cause injury or mechanical damage.
sold separately
+
English
19