Copying Tapes From A Camcorder - Hitachi VT-F382A Owner's Manual

Advanced Operations (Synchro Editing)
This procedure won't leave index marks unless you press STOP then REC
between sections recorded (more about index marks on page 32 and 35).
Some models of VCR will switch to the "STOP" mode if they are left in the
RECORD/PAUSE mode for more than five minutes. It is a good idea to
not leave your recording deck in RECORD/PAUSE for more than five
minutes so that this will not happen.

Copying Tapes From a Camcorder

If you would like to copy a video tape shot in your camcorder onto your
VCR here's how to do it.
Connect the camcorder's AV output cable to your VCR. (see diagram
below)
Camcorder Hookup Illustration
Press the AVX button on the VCRs remote control so that the L2 (Line)
indicator appears in the VCR display.
Press REC/IRT on the VCR to start recording.
Press PLAY on your camcorder to start copying your tape.
If your camcorder is only capable of monaural output (one audio jack)
connect it to the AUDIO IN L input on the front of the VCR.
48
Putting The Record VCR in Pause
Information on Audio Hookup