General Control - Sharp DK-E7P Operation Manual

General control

2.1 STEREO SPEAKER
BUILT-IN SUBWOOFER
VOL
VOL
+
–
To turn the power on
Press the ON/STAND-BY button to turn the power on. The
POWER and E indicator will turn on.
SOUND
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode. The POWER indicator will turn off.
Note:
This unit consumes low current during stand-by mode. However,
please remove the batteries if the unit will not be used for a long
period of time.
2009 September 25
Volume control
Press the VOL (+ or –) button to increase or decrease the
volume.
POWER indicator will be blinking when the volume reaches
maximum or minimum level.
E control
SOUND
When ON/STAND-BY button is pressed, the E
SOUND
turns yellowish orange. You are now in the E
SOUND
where low bass and high frequency are automatically adjusted
according to the volume input.
To turn off E , press the E (TV OUT) button. The
SOUND SOUND
E indicator will go off.
SOUND
Auto Power off function
If no iPod or iPhone is docked and there is no audio cable
connected to AUX IN terminal, the unit will enter the power
stand-by mode after 5 minutes of inactivity.
DK-E7P_A6_EN_SCEE.mif
DK-E7P
ENGLISH
indicator
mode,
E-6