Screen Resolution; Temperature / System Monitoring - Fujitsu D2440 Technical Manual

Features
3.4

Screen resolution

Depending on the operating system used the screen resolutions in the following
table refer to the Matrox graphic controller on the system board. The Matrox
graphic controller is integrated in the iRMC (integrated Remote Management
Controller).
Screen resolution
640x480
800x600
1024x768
1152x864
1280x1024
If you are using an external graphic controller, you will find details of supported
screen resolutions in the operating manual or technical manual supplied with
the graphic controller.
3.5

Temperature / system monitoring

Temperature and system monitoring aim to reliably protect the computer
hardware against damage caused by overheating. In addition, any unnecessary
noise is also prevented by reducing the fan speed, and information is provided
about the system status.
The temperature and system monitoring is controlled by an onboard controller.
The following functions are supported:
Temperature monitoring
Measurement of the processor temperature, the system board temperature
by an onboard sensor and measurement of the ambient temperature by a
temperature sensor.
Fan monitoring
Fans that are no longer available, blocked or sticky fans are detected.
D2440/D2932 (RX330 S1)
Supported colors
8 bit, 16 bit, 24 bit
16 bit, 24 bit
16 bit
8 bit
8 bit
Technical Manual
Screen resolution
19