Selecting A Supported Display Mode - Lenovo 6135-AB2 User Manual

Table 2-2. OSD functions (continued)
OSD Icon on Main Menu Submenu

Selecting a supported display mode

The display mode the monitor uses is controlled by the computer. Therefore, refer to
your computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.
This is normal and the image can be readjusted using automatic image setup and the
image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or
Flat Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
2-5
L191 Flat Panel Monitor User's Guide
Options
Default
Custom
Exit Exit
configured to a display mode outside the range of this monitor, you may need
to re-attach the CRT monitor temporarily until you have re-configured the
system; preferably to 1280 x 1024 at 60 Hz, which is the Native Resolution
Display mode.
Description
Menu Position Menu position adjusts menu location on
the screen.
Default returns the menu position to the
default settings.
·
·
·
Factory Reset
·
·
Resets monitor to the original factory
settings.
Accessibility Controls button and menu settings for
accessibility preferences.
·
·
·
Exit the main menu
Horizontal: Changes the horizontal
position of the OSD.
Vertical: Changes the vertical
position of the OSD.
Save
Cancel
Reset
Button repeat rate:
Select to change.
or
Off
Default
Slow
Menu time out: Sets the length of
time the OSD will remain active
after the last time a button is
pressed.