Conformity Certificates - Husqvarna MZ28T Operator's Manual

Conformity Certificates For Model Listed Below:
966613201 / MZ28T Zero Turn Rider
USA requirements
Labels are placed on the engine and/or in the engine compartment stating that the machine will fulfill the
requirements. This is also applicable to special requirements for any of the states, (California emission
rules etc.). Do not remove any of these labels. Certificates can also be supplied with the machine at
delivery or written in the Engine manual. Take care of them as they are valuable documents.
EU Declaration of Conformity Information
Only applicable to European versions
See the Declaration of Conformity Certificate for additional information.
Husqvarna AB, Orangeburg, SC, USA declares under sole responsibility that the machine types stated
on page 1 of this manual, from 2010's serial numbers and onwards (the year is clearly stated in plain text
on the rating plate with subsequent serial number), complies with the requirements of the COUNCIL'S
DIRECTIVES:
- of May 17, 2006 "relating to machinery" 2006/42/EC, annex IIA.
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC,
and applicable supplements.
- of May 8, 2000 "relating to the emission of noise to surroundings" 2000/14/EC.
The following harmonised standards have been applied: EN ISO 12100-2, EN836.
Business Name and Address:
Husqvarna
172 Old Elloree Rd
Orangeburg, SC 29115 USA
Notified Body:
SNCH, 11 Route de Luxembourg, L-5230 Sandweiler, has issued reports regarding the assessment
of conformity according annex VI of the COUNCIL'S DIRECTIVE of May 8, 2000 "relating to the noise
emissions in the environment" 2000/14EC.
56

CONFORMITY CERTIFICATES