Locating The Rating Labels - HP L1940T User Manual

3. If mounting the monitor using another manufacturer's solution, use the screws (1) previously
removed from the monitor base to mount the display (2) to a swing arm or other mounting fixture.
Consult the documentation included with the mounting fixture for additional instructions.
CAUTION
attach a third-party mounting solution to the monitor, four 4mm, 0.7 pitch, and 10mm long
screws are required (not provided with the monitor). Longer screws should not be used
because they may damage the monitor. It is important to verify that the manufacturer's
mounting solution is compliant with the VESA standard and is rated to support the weight
of the monitor display panel. For best performance, it is important to use the power and
video cables provided with the monitor.
Figure 3-14

Locating the Rating Labels

The rating labels on the monitor provide the spare part number, product number, and serial number.
You may need these numbers when contacting HP about the monitor model. The rating labels (1) are
located on the rear panel of the monitor display head.
Figure 3-15 Locating the Rating Labels
This monitor supports the VESA industry-standard 100mm mounting holes. To
Mounting the Monitor Using a Third-Party Solution
Locating the Rating Labels 13