Hook-Up Cables And Connectors; 300-Ohm Twin Lead Cable; Phono Connector; S-Video (Super Video) Cable - Hitachi 55HDT52 Operating Manual

Hitachi operating guide plasma television 42hdt52, 42hdt52a and 55hdt52
Table of Contents

Advertisement

Hook-up Cables and Connectors

Most video/audio connections between components can be made with shielded video and audio cables that have
phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be
purchased from most stores that sell audio/video products. Below are illustrations and names of common
connectors. Before purchasing any cables, be sure of the output and input connector types required by the
various components and the length of each cable.

300-Ohm Twin Lead Cable

This outdoor antenna cable must be connected to an
antenna adapter (300-Ohm to 75-Ohm).

Phono Connector

Used on all standard video and audio cables which
connect to inputs and outputs located on the
television's rear jack panel and side control panel.
"F" Type 75-Ohm Coaxial Antenna Connector
For connecting RF signals (antenna or cable TV) to the
antenna jack on the television.

S-Video (Super Video) Cable

This cable is used on camcorders, VCRs and laser-
disc players with an S-Video feature in place of the
standard video cable to produce a high quality picture.
Optical Cable
This cable is used to connect to an audio amplifier with
an Optical Audio In jack. Use this cable for the best
sound quality.
HDMI Cable
This cable is used to connect your external devices
such as Set-Top-Boxes or DVD players equipped with
an HDMI output connection to the TV's HDMI input.
Stereo Cable (3.8mm plug to 3.5mm plug)
Used to connect equipment with mini stereo audio jack
to the left and right audio inputs on the rear and side
panels.
USB Cable
This cable is used to connect your digital camera to the
Photo Input in the side of the Plasma television.
IR Mouse Cable/G-LINK Cable (Provided)
Connect the IR Mouse to the IR Blaster output of your
Plasma Television when A/V Network is used. You
must place the IR Mouse in front of the corresponding
IR window of your cable box and VCR. This
connection allows your TV, and the TV Guide On
Screen
TM
system, to control your cable box and/or VCR.
Power Swivel Cable (Provided with 42" Models)
This cable is used to connect the swivel stand to the
rear panel of the Plasma Television.
IEEE1394 Cable
This cable is used to connect your digital television to
external digital devices.This cable will carry both the
video and audio information.
Sub-Woofer Cable
Used to connect the Sub-Woofer Out to the Sub-
Woofer Input of an audio amplifeier (not included).
AUDIO OUT
2
3.8mm
RCA TYPE
STEREO
PLUGS
MINI-PLUG
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

42hdt52a42hdt52

Table of Contents