Repeat; Program; Random Playback; Audio Language - Hitachi DV-P755U Instruction Manual

PLAYING A DISC
4
To return to a Marker later, press SEARCH MODE
four times (CD: three times) during playback and s or
B to choose the desired marker, then press ENTER.
NOTES:
• Opening the disc tray, turning off the unit, or selecting AC (All
Clear) followed by ENTER will erase all Markers.
• To clear a marker, position the cursor on to the marker
number to be cleared by using s or B, and press CLEAR.
• You can mark up to 10 points.
5 Press SEARCH MODE or RETURN to exit.

Repeat

• REPEAT is available only during playback.
REPEAT TITLE / CHAPTER
To activate the repeat function, press REPEAT during playback.
• The repeat mode changes as described below every
time you press the button.
OFF
CHAPTER
(repeat off)
(current chapter repeat) (current title repeat)
NOTES:
• Repeat Title/Chapter is not available on some scenes.
• The repeat setting will be cleared when moving to other
titles or chapters.
REPEAT TRACK
To activate the repeat function, press REPEAT during playback.
• The repeat mode changes as described below every
time you press the button.
OFF TRACK
(repeat off)
(current track repeat)
NOTE:
• The repeat setting will be cleared by moving to another track.
• Repeat playback does not function during A-B repeat playback.
TRACK
OFF
(repeat off) (current track
repeat)
A-B REPEAT
1 Press A-B REPEAT at your chosen starting point.
• A- appears briefly on the TV screen.
2
Press A-B REPEAT again at your chosen end point.
• A-B appears briefly on the TV screen, and the repeat
sequence begins.
3
To exit the sequence, press A-B REPEAT.
NOTES:
• The A-B repeat section can only be set within the current
title (for DVDs), or current track (for audio CDs).
• A-B repeat is not available with some scenes in DVD.
• To cancel the A point which was set, press CLEAR.
• A-B repeat playback does not function during title, chap-
ter, track or all repeat playback.
DVD
TITLE
CD
ALL
(entire disc repeat)
MP3
GROUP ALL
(current folder (entire disc
repeat) repeat)
DVD CD
– 13 –

Program

This function allows you to
program an Audio CD and MP3
disc to be played in a desired
sequence.
1 In stop mode, press
MODE.
• The PROGRAM screen
will appear.
Press L or M to select a track, then press ENTER.
2
• Press CLEAR to erase the most recently entered program.
3 Press PLAY to play the programmed tracks.
NOTES:
• Press STOP once and then PLAY, playback will restart from the
point where STOP was pressed (program continued).
• Press STOP twice and then PLAY, playback will restart from
the track in the usual way (program cleared).
• Up to 99 tracks can be entered.
• If eight or more tracks were in a program, use SKIP H
G to see all the tracks.
G
• To repeat the current track in the program, press REPEAT repeat-
edly until TRACK appears during playback.
• To repeat the entire program press REPEAT repeatedly until
ALL appears during playback.
• To erase all tracks in the program at once, select ALL
CLEAR and press ENTER at step
OPEN/CLOSE and open the disc tray.
• While a MP3 folder is open:
–Press B B when you want to go to the next hierarchy.
–Press { when you want to go back to the previous
hierarchy (except for the top hierarchy).

Random Playback

This function shuffles the order of tracks instead of playback
in the original sequence.
1 In stop mode, press
MODE twice.
• RANDOM screen appears.
2 Press PLAY to start ran-
dom playback.
NOTES:
• To repeat the track in the random selection, press REPEAT
repeatedly until TRACK appears during playback.
• To repeat the entire random selection, press REPEAT
repeatedly until ALL appears during playback.

Audio Language

This function allows you to select a specific language during
DVD disc playback when multiple language options are available.
1
Press AUDIO during playback.
2 Press AUDIO repeatedly to select your desired
language.
CD MP3
CD-DA TOTAL 0:08:00
8 3:30
9 2:30
10 1:30
ALL CLEAR
ENTER
2/2
8 3:30
H ,
2
, or press
CD MP3
RANDOM
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
--no indication--
PLAY
DVD
EN