Tips On Rear Panel Connections; Audio System Setup - Hitachi 50FX18B Operating Manual

AUDIO SYSTEM SETUP

CAUTION: Do not connect Speakers simultaneously to the REAR
SPEAKER terminal of the Projection TV and an external amplifier. This could damage both
the TV and the speakers. Your TV was designed to use 8 Ohm speakers only. Any other
type may degrade the audio performance of your entertainment system.

TIPS ON REAR PANEL CONNECTIONS

The S-Video connection is provided for high performance laser discs, VCR's etc., that
have this feature. Use this connection in place of the standard video connection if your
device has this feature.
If your device has only one audio output (mono sound), connect it to the left audio jack
on the TV.
Refer to the operating guide of your other electronic equipment for additional
information on connecting your hookup cables.
A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record
its own video or line output (INPUT: 1 in the example on page 11). Refer to your VCR
operating guide for more information on "line" input-output connections.
AUDIO SYSTEM SETUP
Match the numbers below to the diagram for speaker placement and refer to the table
for the different surround sound requirements.
1 The television's internal speakers.
- 15 -