Casio 3298 Operation Manual

MA1203-EA
General Guide
Press B to change from mode to mode. Each mode is explained in detail on the
following pages.
After you perform an operation in any mode, pressing B returns to the Timekeeping
Mode.
Timekeeping Mode
E
Timekeeping Mode
Day of the week
PM indicator
Date
Hour
Second
Minute
E-2
C to increase the selected digits. Holding down C changes the number at
3. Press
high speed.
The format (12-hour and 24-hour) of the alarm time matches the format you select
for normal timekeeping.
When setting the alarm time using the 12-hour format, take care to set the time correctly
as morning or afternoon (PM).
4. After you set the alarm time, press
Daily Alarm is switched on automatically.
E-4
Stopwatch Mode
Mode Indicator
Minutes
Seconds
E-6
Time Setting Mode
Day of the week
PM indicator
Date
Minutes
Seconds
Hour
E-8
Operation Guide 3298
Alarm Mode
In the Timekeeping Mode, press C to switch
between the 12-hour and 24-hour formats.
Day of the week is displayed as follows.
SU:Sunday MO:Monday
TU:Tuesday WE:Wednesday
TH:Thursday FR:Friday
SA:Saturday
A to return to the Alarm Mode. At this time the
The Stopwatch Mode lets you measure elapsed
time, split times, and two fi nishes. The range of the
stopwatch is 59 minutes, 59.99 seconds.
Split time indicator
1/100 second
To set the time and date
B to enter the Time Setting Mode.
1. Use
The seconds digits flash because they are
selected.
A to change the selection in the following
2. Press
sequence.
Seconds Hour
Day of
Date
Week
Holding down A at any time illuminates the display.
The backlight of this watch employs an electroluminescent (EL) light, which loses its
illuminating power after very long term use.
Frequent use of the backlight shortens the battery life.
Stopwatch Mode
Alarm Mode
Hourly time signal on indicator
Mode indicator
Hour
Alarm on
indicator
To stop the alarm
Press A to stop the alarm after it starts to sound.
To switch the Daily Alarm and Hourly Time Signal on and off
Press C while in the Alarm Mode to change the status of the Daily Alarm and Hourly
Time Signal in the following sequence.
[Alarm on Indicator/Hourly Time Signal on Indicator]
To test the alarm
Hold down C while in the Alarm Mode to sound the alarm.
(a) Elapsed time measurement
C
Start
(b) Split time measurement
C
Start
(c) Split time and 1st-2nd place times
C
Start
3. While the seconds digits are selected (fl ashing), press
If you press C while the seconds count is in the range of 30 to 59, the seconds are
reset to "00" and 1 is added to the minutes. If the seconds count is in the range of 00
to 29, the minutes count is unchanged.
4. While any other digits (besides seconds) are selected (fl ashing), press
the number. While the day of the week is selected, pressing C advances to the next
day. Holding down C changes the current selection at high speed.
5. After you set the time and date, press
If you do not operate any button for a few minutes while a selection is fl ashing, the
Minutes
fl ashing stops and the watch goes back to the Timekeeping Mode automatically.
Month
Time Setting Mode
When the Daily Alarm is switched on, the alarm
sounds for 20 seconds at the preset time each day.
When the Hourly Time Signal is switched on, the
watch beeps every hour on the hour.
To set the alarm time
1. In the Alarm Mode, press
because they are selected.
A to change the selection in the following
2. Press
sequence.
Minutes
Hour
Normal Alarm Mode
(No digit fl ashes)
C C C
Stop Re-start Stop
A A C
Split Split release Stop
A C A
Split Stop Split release
First runner Second runner Record time of
fi nishes. fi nishes. second runner.
Record time of
fi rst runner.
C to reset the seconds to "00".
B to return to the Timekeeping Mode.
E-1
A. The hour digits fl ash
Minutes
E-3
E-5
A
Clear
A
Clear
A
Clear
E-7
C to increase
E-9