Dubbing From The Camcorder To A Vcr; Remote Control Range - Hitachi VM-E230A Instruction Manual

Advanced Techniques
4. When the required position is located, the camcorder enters the stop mode and
"SEARCH" disappears from the viewfinder.
Note: If you have ejected the cassette, this function will not operate with that cassette.
(When a cassette is inserted and the recording is started, the position is identified as the
recording start position on that day.)
Note: If the clock battery is not inserted, the date search function does not operate when
the battery providing the power to the camcorder is removed.
Note: When the cassette was recorded by another camcorder, the date search function
does not operate.
Note: The date search function is released when you press the STOP button during date
search mode.
Note: If the recorded time is less than 30 seconds, the date search function may not
operate normally.

Dubbing from the Camcorder to a VCR

Connect the camcorder to a VCR to copy your or a friend's home 8mm recordings to
VHS.
Camcorder to VCR Connection Illustration
1. Connect your camcorder to the VCR, following "Playing Back Your Recording" on
page 26.
2. Turn on your VCR and place it in the camcorder input mode (consult your VCR
manual for details). Operate the television as you normally do to see the signal coming
from the VCR.
3. Hold down the red button of the CAM/OFF/VIDEO switch while you slide the switch to
VIDEO.
4. Insert the recorded tape in the camcorder and a blank tape into the VCR. Set the
VCR to record.
5. Play the tape from the camcorder while recording on the VCR.
Note: If the VCR is connected to a television and the VCR/TV selector is set to VCR, you
can monitor the tape being dubbed.

Remote Control Range

Use the wireless remote control to operate the camcorder from a distance. The PLAY,
F.FWD, REW, STOP, PAUSE (START/STOP) and ZOOM buttons on the wireless
remote control operate the functions of the corresponding buttons on the camcorder.
Aim the wireless remote control at the infrared receiver of the camcorder.