Choosing And Playing Back Multiple Scenes - Hitachi DZ-BD70A Instruction Manual

Choose a scene by pressing
/ (left/right).
• Holding down the button will increase the scene selection speed. Use the
"Current scene number/Total number of scenes" display and the bar graph as
reference.
Press the confirmation button.
The chosen scene is played back.
Playback is paused at the final frame of the last scene, and " " (playback pause
icon at the final frame) appears. When this condition continues for longer than
five minutes, the display will automatically return to the disc navigation screen.
• To promptly return to the disc navigation screen, press
NAVIGATION.
To return to recording pause mode, press the confirmation button.
• If you press the confirmation button while " " is displayed, playback starts
from the first scene.
BD-R RAM -RW (VR)
HDD BD-RE

Choosing and playing back multiple scenes

After step of "Choosing and playing back a scene" (p.48), perform procedures
according to your purpose from the table below. When you have finished choosing
scenes, press the confirmation button to begin playing them back.
• You can utilize more than one method in the table below when choosing scenes.
• You can choose up to 999 scenes.
• The color of the frame(s) may change depending on your operations as follows:
– Yellow: indicates your current position (cursor frame)
– Red: indicates scenes already chosen
– Blue: indicates the range of consecutive scenes being selected
– 2-color frame: includes the meaning of both colors
Select multiple scenes
individually
Using the current scene as
your starting point, select
multiple previous or
succeeding consecutive
scenes
/ (up/down, previous page/following page) and
-RW (VF) R CARD
Select a scene by pressing
then press SELECT.
Repeat this step to choose the next scene.
Press and hold SELECT until the cursor frame
becomes blue.
Choose a final scene by pressing
then press the confirmation button to confirm the
setting.
or DISC
/ / / ,
/ / / ,
49