Specifications - Yamaha MT120 Operation Manual

SPEClFlCATlONS
TAPE TRANSPORT
Tape Type
Heads
Tape Speed
Pitch Control
Wow & Flutter
Rewind Time
Motor
CONNECTORS
Input 1 — 4
AUX RETURN L & R
STEREO OUT L & R
PHONES
TAPE OUT 1 — 4
AUX SEND
MONITOR OUT L & R
ELECTRICAL SPECIFICATIONS
Frequency Response
S/N ratio
(3% THD Level)
Distortion
Channel Separation
Erasure Ratio
Noise Reduction
Graphic Equalizer
GENERAL
Power Requirements
Power Consumption
Dimensions (WxHxD)
Weight
of
dbx is a trademark
0 dB = 0.775 Vr.m.s.
All specifications subject to change without notice.
Chrome (70 microsec. EQ)
4-channel Permalloy rec/play head
4-channel ferrite erase head
4.8 cm/sec., 9.5 cm/sec.
Approx. ± 10%
Less than 0.12% WRMS
Approx. 110 sec., for C-60 tape
DC servo motor
Input Impedance
Rated Input Level
Max. Input Level
Min. Input Level
Input Impedance
Rated Input Level
Min. Input Level
Output Impedance
Load Impedance
Rated Output Level
Load Impedance
Max. Output Level
Output Impedance
Load Impedance
Rated Output Level
Output Impedance
Load Impedance
Rated Output Level
Output Impedance
Load Impedance
Rated Output Level
40 Hz to 18 kHz, ±3 dB at 9.5 cm/sec.
(NR OUT)
40 Hz to 13 kHz, ±3 dB at 4.8 cm/sec.
85 dB, dbx ON, IHF-A
1.0% at 315 Hz, dbx ON, -13 dB Rec. Level
Greater than 65 dB at 1 kHz, dbx ON, (B.P.F)
Greater than 70 dB at 1 kHz, dbx ON
dbx *
100, 400, 1k, 5k, 10kHz (± 10 dB), Q = 0.7
U.S. & Canadian Models: 120 V AC, 60 Hz
UK Model: 240 VAC, 50 Hz
General Model: 230 V AC, 50 Hz
16 W
410 x 80.8 x 237 mm (16-1/8" x 3-3/16" x 9-5/16")
2.6 kg (5 Ibs 12 oz)
dbx Incorporated.
10k-ohms
-10 dB to -50 dB (fader nominal)
+ 10 dB (gain control min.)
-56 dB (gain control, fader max.)
10k-ohms
-10 dB (AUX RETURN level control nominal)
-16 dB (AUX RETURN level control max.)
1 k-ohm
Greater than 10 k-ohms
-10 dB into 50 k-ohms
8 to 40 ohms
45 mW + 45 mW/40 ohms
1 k-ohm
Greater than 10 k-ohms
-10 dB into 50 k-ohms
1 k-ohm
Greater than 10 k-ohms
-10 dB into 50 k-ohms
1 k-ohm
Greater than 10 k-ohms
-10 dB into 50 k-ohms
25