Dell P2815Q User Manual page 43

DisplayPort
Press the
1.2
the DP MST (Daisy Chain) feature, enable DP 1.2.
NOTE: Ensure your graphics card can support these
features before selecting DP 1.2. Wrong setting may result
in blank screen. Some graphics card do not support MCCS
(Monitor Control Command Set) at DP 1.2. In these cases,
DDM (Dell Display Manager) may not run.
DisplayPort 1.2
Reset Display
Select this option to restore default display settings.
Settings
Energy
Settings
Power Button Allows you to set the power LED indicator on or off to save
LED energy.
USB By turning on or off to control USB power supply while
monitor under standby mode but without USB upstream
cable .
Reset Energy Select this option to restore default Energy Settings.
Settings
key to enable or disable DisplayPort 1.2. To use
is disabled when input source is HDMI
Operating the Monitor
.
43
