Installing The Expresscard Cage; Removing The Wifi-Switch Board - Dell Latitude E6230 Owner's Manual

Installing the ExpressCard Cage

1. Insert the ExpressCard cage into its compartment.
2. Tighten the screws to secure the ExpressCard cage to the computer
3. Connect the ExpressCard reader cable.
4. Install the:
a) base chassis
b) speakers
c) heatsink
d) bluetooth module
e) keyboard
f) palmrest
g) base cover
h) battery
i) ExpressCard
j) SD card
5. Follow the procedures in

Removing the WiFi-Switch Board

1. Follow the procedures in
2. Remove the:
a) SD card
b) ExpressCard
c) battery
d) base cover
e) palmrest
f) keyboard
g) bluetooth module
h) heat-sink fan
i) speakers
j) base chassis
3. Disconnect the WiFi-switch board cable.
After Working Inside Your Computer .
Before Working Inside Your Computer .
43