Advertisement
QuickSpecs
Technical Specifications
Material Usage
DA - 14049 Worldwide — Version 12 — August 3, 2012
Plastics parts weighing over 25 grams used in the product are marked per ISO
11469 and ISO1043.
This product contains 0% post consumer recycled plastic (by wt.)
This product is greater than 91.5% recycle-able when properly disposed of at
end of life.
Packaging Materials
External:
Corrugated 509 g
Internal:
Polyethylene low density 6 g
Molded Pulp 198 g
The Corrugated packaging material is made from 80% recycled content.
The Polyethylene low density packaging material is made from 100%
recycled content.
The Molded Pulp packaging material is made from 100% recycled
content.
HP follows these guidelines to decrease the environmental impact of product
packaging:
Eliminate the use of heavy metals such as lead, chromium, mercury and
cadmium in packaging materials.
Eliminate the use of ozone-depleting substances (ODS) in packaging
materials.
Design packaging materials for ease of disassembly.
Maximize the use of post-consumer recycled content materials in
packaging materials.
Use readily recyclable packaging materials such as paper and
corrugated materials.
Reduce size and weight of packages to improve transportation fuel
efficiency.
Plastic packaging materials are marked according to ISO 11469 and DIN
6120 standards.
This product does not contain any of the following substances in excess of
regulatory limits (for reference of these limits please refer to the HP General
Specification of the Environment:
(http://www.hp.com/hpinfo/globalcitizenship/environment/
supplychain/gen_specifications.html):
Asbestos
Certain Azo Colorants
Certain Brominated Flame Retardants - may not be used as flame
retardants in plastics
Cadmium
Chlorinated Hydrocarbons
Chlorinated Paraffins
Formaldehyde
HP 6360t Mobile Thin Client
Page 12
Advertisement
