Yamaha Electone Stagea ELS-01 Quick Manual page 36

7
NOTE
If you want to abort the
operation, press the
[CANCEL] button.
Never attempt to turn the
power off during copying a
protected song. Data may
be lost.
36 ELS-01/01C/01X Version 1.8 New Functions
To copy a song from USB flash memory to another:
It is recommended that you use connect both media (source and destination) to the
USB TO DEVICE terminal. However, if there are not enough terminals available, you
can copy a song by following the procedure below.
The folder copy can not be executed in this procedure.
1
Follow the step 1 – 3 on page 34.
2
Press the
displayed.
3
Select "MEMORY" as the destination.
4
Press the [EXECUTE] button to execute the Song Copy.
The song to be copied is copied to the internal memory of the Electone. The
message "Eject the source media" will appear on the display.
5
Eject the source media.
After ejecting the source media, the message "Insert the destination media" will
appear on the display.
6
Insert the destination media to which you want to copy.
7
Select the destination.
For details on specifying the destination, see page 11.
8
Press the [EXECUTE] button to execute Song Copy. Select
[OVERWRITE] to execute or [CANCEL] to abort the operation.
The song is copied with the same name as the source song. If you copy a song to
a folder that contains a song whose name is the same as the source song, the
copied song name will be "source song name_XXX" (XXX indicates song
number).
If you copy an XG-compatible song to another folder or media that contains a
song with the same name as the source song, a message appears prompting
confirmation of overwriting the song. Selecting [OVERWRITE] overwrites the
XG-compatible song in the destination.
If you want to change the song name, see page 18.
button several times until the Media List is