Cleaning The Printhead - Canon imagePROGRAF iPF6400S User Manual

Large format printer
Hide thumbs Also See for imagePROGRAF iPF6400S:
Table of Contents

Advertisement

iPF6400S
If the Tab Selection screen is not displayed, press the Menu button.
Note
3
Press the OK button.
The Set./Adj. Menu is displayed.
4
Press ▲ or ▼ to select Test Print, and then press the OK button.
5
Press ▲ or ▼ to select Nozzle Check, and then press the OK button.
The printer now prints a test pattern for checking the nozzles.
6
Check the printing results.
If the horizontal lines are not faint or incomplete, the nozzles are
clear.
If some sections of the horizontal lines are faint or incomplete, the
nozzles for those colors are clogged.
If horizontal lines are faint or incomplete, follow the steps below
and check again for nozzle clogging.
1.
Clean the Printhead. (See "Cleaning the Printhead.")
2.
Print a test pattern to check the nozzles.
If you repeat these steps several times but the horizontal lines are still faint or incomplete, contact your Canon
dealer.
Important

Cleaning the Printhead

Cleaning the Printhead
If printing is faint, cleaning the Printhead may improve results.
Choose one of two Printhead cleaning modes ( Head Cleaning A or Head Cleaning B ), depending on the problem to
resolve.
Head Cleaning A
Use this mode if printing is faint or contains foreign substances. This method of cleaning consumes the least
amount of ink.
It takes about six minutes to complete.
Head Cleaning B
Use this mode if no ink is ejected at all, or if Head Cleaning A does not solve the problem.
It takes about seven minutes to complete.
Do not remove the Maintenance Cartridge or ink tanks during either Head Cleaning A or Head Cleaning B.
Ink may leak or an error may occur.
Important
If printing does not improve even if you execute Head Cleaning B, try repeating Head Cleaning B once or twice. If this still
does not improve printing, the Printhead may have reached the end of its useful life. Contact your Canon dealer for assis-
tance.
By default, nozzles are checked at fixed intervals.
Configure the settings on the Control Panel menu in Nozzle Check.
Note
(See "Menu Settings.")
User's Guide
P.634
P.891
Cleaning the Printhead
891

Advertisement

Table of Contents
loading

Table of Contents